Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Ultramid® B3WG7 RC BK00564 - PA6-GF35 - BASF

Material Data Center offers the following functions for Ultramid® B3WG7 RC BK00564:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Ultramid B datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caractéristiques des transformations/physiques - Propriétés mécaniques - Propriétés thermiques - Propriétés diverses - Propriétés spécifiques à la matière - Recommandations pour la transformation Moulage par injection
Any use of this information falls under the rules of our disclaimer.
Informations produit
Glass fibre reinforced, heat stabilised, and pigmented black polyamide 6 injection moulding compound possessing balanced engineering properties combined with good processability. It contains post-industrial recycling fractions (PIR)of minimum 50% and can be used for multiple applications requiring a recycled material.
Caractéristiques des transformations/physiquessec / condUnitéNorme du test
ISO Data
Indice de fluidité à chaud en volume, MVR 24 / * cm³/10min ISO 1133
Température 275 / * °C -
Charge 5 / * kg -
Propriétés mécaniquessec / condUnitéNorme du test
ISO Data
Module en traction 10500 / - MPa ISO 527
Contrainte à la rupture 175 / - MPa ISO 527
Déformation à la rupture 2.9 / - % ISO 527
Résistance au choc Charpy, +23°C 80 / - kJ/m² ISO 179/1eU
Résistance au choc Charpy, -30°C 70 / - kJ/m² ISO 179/1eU
Résistance au choc Charpy (entaillé), +23°C 12 / - kJ/m² ISO 179/1eA
Résistance au choc Charpy (entaillé), -30°C 8 / - kJ/m² ISO 179/1eA
Propriétés thermiquessec / condUnitéNorme du test
ISO Data
Température de fusion, 10°C/min 220 / * °C ISO 11357-1/-3
Température de fléchissement s/chrg, 1.80 MPa 215 / * °C ISO 75-1/-2
Propriétés diversessec / condUnitéNorme du test
Absorption d'eau 6.2 / * % Sim. to ISO 62
Absorption d'humidité 2 / * % Sim. to ISO 62
Masse volumique 1410 / - kg/m³ ISO 1183
Propriétés spécifiques à la matièresec / condUnitéNorme du test
ISO Data
Indice de viscosité 145 / * cm³/g ISO 307, 1157, 1628
Recommandations pour la transformation Moulage par injectionValeurUnitéNorme du test
Pré-séchage - température 80 °C -
Pré-séchage - temps 4 h -
L'humidité de traitement ≤0.15 % -
Température de la matière fondue 270 - 290 °C -
Température du moule 80 - 90 °C -
Caractéristiques
Transformation
Moulage par injection
Conditionnement
Granulés, Noir
Additifs
Lubrifiant, Agent de démoulage
Propriétés spéciales
Stabilisé à la chaleur
Certifications
Résine de contenu recyclé
Disponibilité régionale
Europe
Autres informations
Moulages par injection
PREPROCESSING
Pre/Post-processing, max. allowed water content: .15 %
Pre/Post-processing, Pre-drying, Temperature: 80 °C
Pre/Post-processing, Pre-drying, Time: 4 h

PROCESSING
injection molding, Melt temperature, range: 270 - 290 °C
injection molding, Melt temperature, recommended: 280 °C
injection molding, Mold temperature, range: 80 - 90 °C
injection molding, Mold temperature, recommended: 80 °C
injection molding, Dwell time, thermoplastics: 10 min
Conditions générales
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.